Eparency CLEAR ALL PURPOSE 2:1 Epoxy Resin
Eparency ULTRA CLEAR All Purpose 2:1 Epoxy Resin, Resin Art, Brisbane, Australia

Eparency CLEAR ALL PURPOSE 2:1 Epoxy Resin

Regular price$28.10
/
Tax included. Shipping calculated at checkout.

Size
Please note that our resin is shipped from a different warehouse (based in VIC). You will receive your resin in a separate parcel to other items ordered from our website. Please also note that express shipping is not available on resin orders. If you select and pay for express shipping, only non-resin items (eg silicone moulds) will be posted via express. 
  •  2:1 Mixing ratio by volume
  • 100% Australian owned and Australian manufactured
  •  20-30mm pour depth 
  • Pot life: 2-4 hours (Data based on 100ml mixing; 20 degree C room temperature).
  • Time to reach non-tacky: 10-30 hrs Depending on the room temperature (Data based on 100ml mixing)
  • Time to reach full cure: 48 hrs (Data based on 100ml mixing)
  • Viscosity: 600 cps for Part A (Brookfield 20 rpm) 450 cps for Part B (Brookfield 20 rpm)
  • Clarity: Pt-Co value < 10 for both Part A and Part B

Can be used to cast anything, from small jewellery to deep casting river tables. each pour should not exceed 20mm depth for river table size, and not exceed 50mm depth for smaller casting such as pyramids etc. It can also be used for coating, however not suitable for making beach scenes coating, waves, cells or other effects due to its low viscosity nature. Small items would cure slower (approx. 3 days) and bigger items would cure slightly faster. If intending to have a fast curing process Eparency fast curing resin would be more suitable.

Directions for use: Mix resin and hardener in exactly 2:1 ratio by volume ( 2 parts A and 1 part B) Using a plastic or silicone container for mixing and mix thoroughly, scrape sides and bottom of container to fully integrate products. Please use a mixing container that is clean and free of contamination. Tiny contamination would deteriorate the quality of final result. Do not use metal, especially aluminium containers to mix or mixtures will turn milky colour. Once the product is poured into the mould, let the resin settle allowing air bubbles or foam to float to the surface, most bubbles will float to the surface and burst themselves. Any remaining bubbles or foam can be removed with a heat gun or Blow torch.

CAUTION: Do not swallow. Keep away from Children. Use PPE when working with resin. Refer to the eparency website for Safety Data Sheet. 

Free Shipping on all orders $150+ within Australia

When will my order be shipped?
Orders are dispatched within 1-3 business days.

Where is my order shipped from?
Orders are dispatched from Brisbane, Australia.

* Please note all epoxy resin is shipped from an alternative warehouse in Victoria and will arrive in a seperate parcel to other items.


Recently viewed