Eparency TOP COAT Clear 1:1 Epoxy ART Resin

• 1:1 Mixing ratio by volume
• 100% Australian owned and Australian manufactured
•  Less than 4mm pour depth
  
• Can withstand surface temperatures around 80-95oC (resisting marks from hot drinks ect)
• Pot life: 1-2 hours (Data based on 100ml mixing; 20 degree C room temperature). 
• Time to reach non-tacky: 5-18 hrs Depending on the room temperature (Data based on 100ml mixing)
•  Time to reach full cure: 72 hrs (Data based on 100ml mixing):

• Viscosity: 760 cps for Part A (Brookfield 20 rpm), 21000 cps for Part B (Brookfield 20 rpm). The viscosity of the A+B mixture is around 5000cps. Its not suitable for deep casting as it might trap some bubble in a deep block.

• Clarity: Pt-Co value < 10 for both Part A and Part B

Top Coat resin: Can be used for anything less than 4mm pour depth including Coating, wall art, tile coasters, jewellery, timber surface, top coat of alcohol ink paintings, colour mixing (high viscosity keeps the colours from washing out), doming, excellent beach scenes, wave, cells and other effects with its high viscosity nature.

Directions for use: Mix resin and hardener EXACTLY in 1:1 ratio. Use a plastic or silicone container for mixing. Scrape sides and bottom of container to fully integrate products. Please use a mixing container that is clean and free of contamination. Tiny contamination would deteriorate the quality of final result. Do not use metal, especially aluminium containers to mix. Mixtures will turn milky colour in aluminium containers. DO NOT coat over 4mm. Multiple coats need to be applied to achieve thick coats over 4mm. Prewarming might be required to remove bubbles from thick coating. Once the product is coated onto the surface, do not stir or touch to avoid defects. You can use a lighter or flame torch to eliminate the surface bubbles. Curing takes 24-48hrs.

CAUTION: Do not swallow. Keep away from Children. Use PPE when working with resin. Refer to the eparency website for Safety Data Sheet.